image 2329772018-2image 2329772018-0

image 2329772018-1image 2329772018-3

Ford Mustang Turbocharged 99 GT 4.6 32 Valve Rocket - $16,500

Turbocharged 99 GT 4.6 32 Valve Rocket
Rear Wheel Dyno'ed @ 700hp W/Cold A/C
1999 mustang GT, laser red, had 04 cobra bumper painted to match, has black interior, 04 cobra seats, power windows, power steering, Cold A/C, tinted windows, cd player, heater, all power accessories.YOU CAN DRIVE IT ANYWHERE!
-4.6 liter aluminium block, bored .020'', decked, squared, line honed, arp main stud kit
-milodon crank scrapper and windage tray, 283 CI $800
-kellog forged steel crank, internal balenced $500
-manley 4340 rods with arp 2000 upgraded bolts $600
-diamond custom made turbo pistons $1000
-hellfire piston rings $300
- Felpro MLS steel head gaskets $100
-ARP 2000 headstuds $300
-03 mach1 4v heads, RGR out of illinois did the work, ferrea 6000 valves, FR500 high lift springs, custom turbo valve job, FR500 followers and FR500 lash adjusters, 206 duration cams $2000
- Magnesium FR500 intake, very rare and very expensive, was sent to roush engines were it was cut, ported, weled and expoxied for big airflow. $3500, thats right a $3500 intake
-01 cobra throttle body
- lentech 4r70w fresh, harden shafts, extra clutchs, deep pan, manual valve body,
with trans brake- $4000
PTC 9" Bullet Proof turbo converter- (lite weight-only weights 22lb) steel stator, non-lockup,spragless $675.
-Dynotech custom 4'' driveshaft with 1350 u-joints
- radiator and trans cooler
-big B&M external trans cooler also
-fresh 3.27 gears, motorsport 31 spline carrier, extra clutch packs, 31 moser axles, axle tubes tig welded on a jig
-all torque boxes welded
-60 lb motron injectors
-PMAS blow-through meter
-roush custom made billet fuel rails
--8 fuel feed
-custom billet adapter for fuel rail sensor
- modded 03 cobra fuel hat with twin 6an outlets
- twin intake gt supercar fuel pumps
-aeromotive y-block
aeromotive fuel filter
-twin fuel pump driver modules
-system good for 800 rwhp
-new strange struts
-MMR coilovers with 150lb springs
-MMR caster camber plates
-MMR Billet bumper steer kit
-PA racing tubular k-member
-PA racing heims joint narrowed tubular a-arms
-Team Z anti-roll bar
-UPR lower adjustable control arms
-wolfe upper adjustable control arms
-Alum. QA1 adjustable shocks
-ARP front and rear wheel studs
-all stainless hot side, all v-banded
-master power T76mm turbo
-38mm wastegate
-50mm tial blow off valve
-31''x12''x3'' intercooler
-all intercooler piping tig weled
-3'' downpipe, 3'' exhaust, 3'' magnaflow muffler
- RPS silicone couplers, and everything is t-bolt clamped
-MAF built into piping
-braided feed and return hoses
weld draglites rear 15x10 with 6.5" BS
weld draglites front 15x3.5
275/60/15 Mickey Thompson Drag Radial
new 165-15 radials on front

This Mustang has a Twin that has went High 8's. There were 3 separate ratings when it was on the Dyno...
On 93 Octane @ 10 psi of boost 500hp
On 93 Octane @ 17 psi of boost 600hp
On 116 Octane @ 17 psi of boost 700hp
All pulls and Tuning were done at Modular Depot Cincinnati,Ohio area.

I really don't want to sell this one since the engine will take up to 1500hp but I own 2 other Turbo cars(this is the fastest one)

My asking price was $22,500.
Now buy it for $16,500.

This is a real sweet and "NASTY FAST" street ride.

For more info call Charlie cell 740-701-8111 Home 740-626-7723 till 10pm